It is learned Chengguan torqueconverte clutch hydraulic electronic truck scale common faults and solutions Summary:

  Fault: If multiple hydraulic electronic truck scale weighing, weight is inconsistent, we can conclude that the truck scale errors, you should immediately stop using overhaul.

Workaround

   1: The truck scales rise to the top, with a piece of paper inserted into the scales cover the four sides of the fork gap paddling around to see if there are places on the list, if any, by the issue of appropriate tools available from Alice

   2: raise tines cover, loosen the sensor retainer, with a large flathead screwdriver to adjust upwards, then you can put on retainer. If there is no adjustment screw on the sensor, you can then remove the tines loosen the retainer cap, then the cap under the four screws to screw 2-3 turns.

   Failure II: hydraulic electronic truck scale weighing, hops are not zero problems

Solution:

    First, the allowed load found a problem that the two scales weighing an item in the same state,

    Need re-calibration and commissioning, until the prospective date. If the number of hops produce zero error, please check the sensor mounting screws are loose, whether in a plane, no loose screws, and if not in a plane, you need to check the sensor itself if there is a problem (the sensor itself detection method: Using the multimeter test four sensors to stop and see if the same linear), if the sensor itself has a problem, replace the sensor.

Fault Three: truck scales weighing no response, often the question of error.

  Solution:

     According to county torqueconverte clutch informed when the hydraulic electronic truck scale encounter this problem, first check whether the line in question, whether there is a short circuit thread, inside the junction box is off, and so on. Next, check whether the meter can boot, and self-test. If the problem caused by the line, you need to connect the wiring, and if so the instrument itself has a problem, please contact the manufacturer / or distribution;

Fault IV: Display not boot, power, error correction procedure is still continuing.

 Solution:

      First check whether the electronic truck scale hydraulic power can monitor the normal power supply (battery has power), such as checking everything is normal, please contact the manufacturer / or distribution.

    Chengguan torqueconverte clutch for you to explain the scope of electronic truck weighing, said:

    1000kg-0.2kg, 2000kg-0.5kg, 2500kg-0.5kg 3000kg-0.5

     Electronic truck scale weighing platform sizes:

     1150mm × 580mm × 85mm ~ 200mm 1220mm × 700mm × 85mm ~ 200mm

     Forklift electronic scale features introduced:

     1 pump sealed as a whole, the original key components imported from Germany, with overload protection

     2 eradicate the ills of oil spills, the size of the piston rod chrome plated solid structure, with overload protection, lowering speed control

     3 spool with a whole piece, unlike the scattered parts, ease of maintenance, making the car more responsive to market demand.

     4 moving parts equipped with alloy hub, able to absorb partial load, wear resistance, long life and easy replacement.

     5 nylon rollers enter and exit rollers to reduce the force of operatives and protect the load wheels and fork;

     6 Descent Control valve with manual sealed pumps

     7 High profile steel fork and U-shaped structure;

     8 up, down, move the three position adjustable handle;

     9 have joined various activities of the oil. · "C" fork structure can support the heavy, very strong;